CLICK HERE TO BUY!

 Here is a fully-functioning quill return spring assembly from the vintage Delta 17" drill press shown in the third photo.  You just get the spring assembly, not the entire machine.TERMS and CONDITIONS – Please read all this below because this language governs the terms and conditions of this sale.  By bidding on my auction you agree to the following terms.

PLEASE LOOK AT ALL THE PHOTOS, THEY ARE… full details here

CLICK HERE TO BUY!

 Sears Craftsman Drill Press Mortising Attachment #25235Fence is stamped 25226.113In good condition.  Should work on most other brand 15-17" drill presses too. .… full details here

CLICK HERE TO BUY!

full details here

CLICK HERE TO BUY!

Offered for bids, with no reserve, and a very low opening price, is a Clausing drill press model 1771. It is wired for 230 Volt three phase. It comes with a Jacobs chuck and has been used in a college shop environment. It was built in 1968. It has a variable speed drive and 3/4 HP, with speeds from 500 -4000 RPM. Note that… full details here

CLICK HERE TO BUY!

Industrial 20" Delta Floor Drill Press Model 70-200  
  • Speed Range: 150-2200
  • Chuck Taper: Jacobs 3
  • Quill: Diameter - 2 7/16"
  • Quill Stroke: 4 3/4"
  • Capacities: Key chuck= 5/8"; chuck to table= 24 1/2"; chuck to base= 44"
  • Overall Dimensions: 67" tall; 18 1/2" wide; 34" deep
  • Weight: 345 lbs.
  • Quill Travel: 4 3/4" step pulley or variable speed
  • Motor: 1HP 120/240V, single phase; 60 Hz.; 1720RPM
  • Spindle Speeds: 150, 260, 300, 440, 490, 540, 1150

CLICK HERE TO BUY!

These are a pair of rare pot metal rear guards used on the 1937 to 1940 Delta 17" Drill Presses with the cast iron guard if front.  The link below shows a drill press with this type of belt guard.

These guards are in very rough shape and will need some work to be serviceable and look good.  As you can see in the photos one of the guards… full details here

CLICK HERE TO BUY!

THIS ITEM HASE BEEN RELISTED DUE TO NON PAYMENT FROM THE PREVIOUS BUYER.

 

DELTA ROCKWELL MULTIPLE SPINDLE DRILL PRESS ASSEMBLY

  • 220V/440V 3 Phase
  • 3/4 HP Motors
  • 4 Station
  • 17” Height Capacity (Approximately)
  • 5 Position Variable Speed Drive
  • Morse Taper 2 (MT2) Spindles
  • 6 1/2’ X 2’ Table (Working Surface)

 … full details here

CLICK HERE TO BUY!

#60-55 Cap from an Atlas Model 63 Drill PressThis is the cap for the column or the return springShould fit other Atlas models and Atlas manufactured Craftsman drill pressesYou are bidding on the cap only, return spring and column not includedFits a little loosely in the return spring, nothing a little shimming can't fix Here's a link to the parts list for the drill press:Parts… full details here

CLICK HERE TO BUY!

#60-4BX Quill/Spindle Assembly w/ Jacobs 6A Chuck from an Atlas Model 63 Drill Pressincludes Jacobs chuck keyShould fit other Atlas models and Atlas manufactured Craftsman drill pressesReally nice condition, the chuck looks great and works perfectly, the drill press that this came off of ran very well, splines look really goodYou are bidding on the quill/spindle/chuck only, the rest of the drill press not… full details here

CLICK HERE TO BUY!

If you are rebuilding an old Craftsman power tool like a Bench Saw or a Drill Press and need the original light assembly this is it.  It was taken off of a late 40's Band Saw and is in excellent shape.  The paint even still looks great inside and out.  Please look at the photo below as what you see is what you get, nothing… full details here

CLICK HERE TO BUY!

3-spoke Spindle Feed from an Atlas Model 63 Drill PressShould fit some other Atlas models and Atlas manufactured Craftsman drill pressesYou are bidding on the 3-spoke spindle feed hub and handles, the rest of the drill press not included Here's a link to the parts list for the drill press:Parts List… full details here

CLICK HERE TO BUY!

Set of pulleys from an Atlas Model 63 Drill Press#60-6A spindle pulley and #60-29 motor pulleyShould fit other Atlas models and Atlas manufactured Craftsman drill presses Really nice condition, no chips or cracks, splines look really goodThe drill press these came off of always ran very smoothlyHere's a link to the parts list for the drill press:Parts List… full details here

CLICK HERE TO BUY!

 An original light from a 1947 Delta 14" Bandsaw. It's in good condition but the switch socket and cord are missing so you'll need to add your own. They appeared to be ordinary hardware store lamp components, but I can't say for sure… full details here

CLICK HERE TO BUY!

# 41-45 Spindle Cover from an Atlas Model 63 Drill PressShould work on some other Atlas and Atlas manufactured Craftsman drill pressesGreat condition, just a couple small dingsHere's a link to the parts list for this drill press:Parts ListYou are bidding on the chrome spindle cover only… full details here

CLICK HERE TO BUY!

SquareTrade © AP6 SquareTrade © AP6   SquareTrade © AP6.0… full details here

CLICK HERE TO BUY!

JET 20" Variable Speed Drill Press

2 HP, 1Ph, 115/230V

 Model Number: J-2221VS / Stock Number: 354221

 The J-2221VS 20" Variable Speed Drill Press is an industrial machine with a 2HP motor. It boasts a variable spindle speed, external MT-3, 6" quill travel, massive 3" qiull diameter, and a heavy-duty cast iron design. The table… full details here

CLICK HERE TO BUY!

EMCO mini 16" model jewelry maker size DRILL PRESS, made in W. Germany GeleG  TABLETOP, label with the following information: 115V, 60Hz, 95/65w, D-8900 might be model number, adjustable table,  5000/3000 1/min, Augsburg Rehmstr. 4, motor works fine, needs new belt, bottom is 6" in diameter, adjustable drill plate is 3 1/8" x 4 3/4", has 3 t-nut slots and 4 cutter board holes… full details here

CLICK HERE TO BUY!

I'm retiring, and selling auto/wood shop machinery. here is a Guardian Power 3/4 HP drill press.  Works fine, too expensive to ship East.  Local pickup in the Tucson/Phoenix area. Possible delivery by seller (buyer pays, contact seller) to Tucson/Phoenix, AZ. Basic drill press. Will not rip items out of your hand (belt drive). AS IS. NO WARRANTY… full details here

CLICK HERE TO BUY!

Dayton 15" Vertical Drill Press 3Z993F Drilling Machine - 115V/1PH bidadoo NR SKU: 2358989 Serial Number: Handling: $75 Title: Not Titled Shipping Method: Freight - Boeing Pallet bWM A: 0013000000CXCfg O: 00550000000zSfj PA: Location: Seattle, WA 98108… full details here

CLICK HERE TO BUY!

Dayton 20" Vertical Drill Press 4TJ94A Drilling Machine - 115V/1PH bidadoo NR SKU: 2358988 Serial Number: Handling: $75 Title: Not Titled Shipping Method: Freight - Boeing Pallet bWM A: 0013000000CXCfg O: 00550000000zSfj PA: Location: Seattle, WA 98108… full details here
 Page 48 of 76  « First  ... « 46  47  48  49  50 » ...  Last » 

Web Hosting by HostGator